Wednesday, April 6, 2011

Foaming at the Mouth

P1150681

Well, foaming at the rafters anyway.

Last week was so rainy that it was hard to get much work done.  But the insulation guys didn’t mind a little rain.

P1150680

They suited right up and got to work.

P1150684

They made quite a mess, but after the spray settled and they were finished foaming, they went back and scraped everything back down to studs and rafters.

P1150699

Now we will be able to attach sheetrock.

P1150698

Then they swept up enormous bags full of the overspray that they scraped up.

P1150688

It looked like a health department raid on the movie theater concession stand.

While all this was happening inside, Wolf Lightning Protection found time to sneak out and bury the loop of copper cable.  I would never have known it happened, if they hadn’t broken a drain pipe and left the hole open so we could see it and fix it.

image

And on the days it wasn’t raining too much, the brick masons came down and worked.

P1150686

Unfortunately, they worked on the back wall over the French doors instead of on the chimney.

You see, after I had a chance to get over the excitement of the chimney being finished, I began to notice that it looked a little squatty.

P1150707

It seemed shorter than it should be and sort of  -- inconsequential.

P1150213_1480

 

image

It didn’t really measure up the the chimney on the plans.  So, we asked Jason the Mason why it was so short.  He explained that they normally make the chimneys 2 feet off of the ridge line, because that is code.  And it is.  It’s the minimum height specified by the code.  So, Builder Gary explained that we wanted it as drawn on the plans he was given.  It took a few days to get them working on it, but finally they did.

P1150777

They tore off the detail at the top and started up again.  As I stood in the backyard admiring their work, guess what I did spy with my little eye?

P1150789

Builder Gary gestured (politely) to Santa that the chimney wasn’t quite right, so ol’ Santa put the level on it.  It was pretty crooked.  So, Santa got out that essential masonry tool: the saw.

P1150791

That seemed to do the trick, and they kept going up. 

image

Until they finally got it tall enough.

P1150828

That’s more like it!  And you can see it from the road.

P1150814

Now that they have finished with the chimney, we were able to get the French doors in beside the fireplace.

P1150820

Now we are one step closer to being completely dried in and ready for sheetrock.  A little more insulation, a little more roof, a little more inspection and we’ll be closing up those rooms!

2 comments:

  1. Just checked your blog! Looking great! It looks like you got your brick from Power Brick in Athens. . . I spent a while a few months ago talking to one of the owners. We were talking about building and the economy and he was telling me how he had been able to keep all of his employees employed without cutting jobs by moving hours around and branching out his business. He was a superb fellow and I am glad you are buying your brick from him!

    ReplyDelete
  2. I love the way you bricked in your fireplace on the inside ~ I'm considering doing this in lieu of a stone mantel. Are you continuing the brick all the way to the ceiling? Are these 10' ceilings? Do you have a more finished photo you are willing to share? Thank you!! Casey

    ReplyDelete